1 x Corona Model RP6D1 6ch 40MHz Dual Conversion Receiver for Futaba and JR
The Corona RP6D1 is a synthesized full range 6 channel 40MHz FM receiver with standard 3-pin connection ports. Say goodbye to glitches and short range limits with this top of the line, Digital Signal Processing, Dual Conversion receiver. The range of this receiver has been tested to over 1 mile!
Synthesized receivers allow you to choose any of the 50 channels (11 - 60) available in the 40MHz FM RC Air Band - NO CRYSTAL NEEDED! This allows you to choose any available channel if you also have a synthesized transmitter. You can also use the RP6D1 with any standard crystal type
Setting the RP6D1 receiver to your desired channel is as simple as 1 2 3:
1. Turn your transmitter on and be sure it's set to PPM and your desired channel.
2. Position the receiver close to the transmitter, and provide power to the receiver.
3. After you see the LED of the receiver flash two times, press and hold the button on the receiver
for two seconds, then release and press the button again. The LED will flash for a short time, and
then stop flashing, indicating that the receiver is ready to use.
The Corona RP6D1 receiver is a good choice for electric park flyers, and for large glow and electric
models. The 'Auto Shift' feature allows it to be used with both positive shift and negative shift transmitters, including Futaba, Hitec, JR, and Airtronics. The end-pin design of this receiver makes it easy to connect?most servos and electronic speed controls available.Using a state-of-the-art receiver chip, careful filtration, and Digital Signal Processing technology, the Corona RP6D1 receiver achieves full range in a small package! By using dual tuned RF circuitry with dual ceramic IF filters, this receiver has ultra narrow selectivity to more effectively reject adjacent channel interference. This is especially important if you fly where several transmitters are
being operated at the same time. You will love the performance of the Corona RP6D1.....and the price!
Corona RP6D1 Specifications:
Size: 1.9 x0.8 x 0.5 inches
Weight: 0.3 oz (8.5g)
Number of channels: 6
Shift polarity: Positive or Negative (auto-detect)
Antenna length: 39 inches
Sensitivity: better than 2.0μV
Range: over 1 mile under good conditions
Operating Voltage: 4.8V to 6.0V DC
Operating Current: 11mA
Selectivity: ±8kHz at 65dB down
Filtering: Dual tuned RF circuitry, Dual 4 pole ceramic filter, DSP filtering with mild algorithm