New YN460-TX(Wireless Speedlight Commander) and YN460-RX(Wireless TTL Speedlite)
For Canon 1000D 550D 500D 450D 400D 350D 50D 40D 5D Mark II 7D
For Canon 430EX 580EX
2.4 Wireless Flash System Supported,Multiple Wireless Flash Control Supported,Remote Power Control on YN460-TX....
Brand New High Quality 100% Satisfaction Guaranteed
Free Gift-Flash Diffuser for YN460-RX Speedlight!!!
Made by high quality flash module,100% brand new!
YN460-TX and YN460-RX is a set of new 2.4G wireless TTL flash system, the characteristics of which is as follows:
* 2.4G wireless TTL flash supported
2.4G wireless TTL flash has been achieved to help you seize every precious moment.
* Multiple wireless flash control supported
YONGNUO design a TTL group and two M groups for the wireless flash system; every group can be adjusted output level independently.
* Remote Power Control on YN460-TX
You won't move back and forth between camera and speedlites any more, the efficiency will increase by more than 60%.
* Rear-curtain supported as well as FEC, FEB
# Two PC ports for synchronous I/O
There are two PC ports, one in which is used for signal input, and the other is for the synchronous signal output. In particular, the PC port for the output also supports the rear-curtain sync.
# Vast-distance wireless flash control
It achieves the remote wireless flash control with the maximum distance over 200 meters.
# There are seven user-configurable wireless channels that can effectively prevent the wireless interference, and maximize the reliable use in the complex environment.
Support for up to 16 YN460-RX speed lights
A YN460-TX can make 16 YN460-RX speedlites flash at the same time, which can provide the better creativity, achieving the speedlights applied in large-scale night illumination.
If you don't have much time to read the whole user manual, we advise you to read this section.
* Wireless connection pairing
You need to make the wireless connection pairing for the YN460-TX and the YN460-RX before the first usage as follows:
Turn on the YN460-TX and the YN460-RX at the same time, meanwhile press the CH button and hold on for about 5 seconds.
The wireless connection pairing is successed if all the YN460-TX and YN460-RX group indicator lights are on at the same time.
* How to use as wireless TTL lighting
Set the YN460-RX to WT group connect the YN460-TX to the camera. Now, the YN460-RX becomes a wireless TTL speedlite and you can start to shoot.
* How to use as 2 groups of remote controllable manual speedlites
Set one YN460-RX to M1 group and another to M2 group, connect the YN460-TX to the camera, and then output level of the M1 and M2 groups can be set on the YN460-TX. You can control 2 YN460-RXs' output level separately!
* How to set YN460-RX's group on YN460-TX
Set YN460-RX to WX group and the actual YN460-RX group will keep the same as the last group of the YN460-TX.
* Abnormal situation:
* If there is abnormality,please turn off the YN460-TX and YN460-RX and then turn on again, try to re-make the wireless connection pairing. For any additional abnormality, you can re-set the YN-460-TX by press the MODE +CH button and hold for about 10 seconds.
o For Canon EOS:1D series, 5D series, 7D, 50D, 40D, 30D, 20D, 10D, 60D, 550D, 500D, 450D, 400D, 350D,1000D Rebel T2i,T1i,XSi,XS,Xti,Xt
o For Canon 430EX 580EX
Package Contents :
o 1x speedlight commander(YN460-TX)
o 1x Flash light(YN460-RX)
o 2x Protector bag
o 1x mini stand hot shoe
o 2x compact disk for illustrating how to work